|
click for PDF
|
|
Features of SPEL Stormceptor
The SPEL Stormceptor has two separate treatment chambers – Soils and oils, where the solids chamber has a full bore inlet which stops any blockages.
The unit is supplied fully assembled as a watertight unit with immensely strong one-piece shell. This is designed to be impervious to water and withstand corrosion for entire life of installation. Options of automatic closure device and alarm / monitor system are available.
|
|
|
click for PDF
|
|
Puraceptor
SPEL Puraceptor class 1 separators are full retention chamber units incorporating an automatic closure device and a coalesce unit. Single chamber models for low risk sites are also available.
|
|
|
click for PDF
|
|
Puraceptors How it Works
The SPEL PURACEPTOR has two chambers, a coalesce and is also fitted with an automatic closure device that is specifically designed to treat and contain major oil spills, making it suitable for high risk applications. It is an Australian made device that can prevent light liquid pollutants from discharging into our waterways.
|
|
|
click for PDF
|
|
SPEL Penrith Lakes Brochure
Download PDF for more info |
|
|
click for PDF
|
|
SPEL Brochure Selection Criteria
High Risk – Where the possibility of major oil spill could occur.
Medium Risk – Retention of total suspended solids, silt, sludge and the capture of gross pollutants.
Low Risk – A gross pollutant trap, sediment and light liquids separator suitable for residential, commercial and domestic areas.
|
|
|
click for PDF
|
|
Stormceptor Class 3 How it works
Download PDF for more info |
|
|
click for PDF
|
|
Stormceptor How it works
Download PDF for more info |
|
|
|
|
All Pumps Stormwater By-pass Interceptor
The ALL-PUMPS SBI 720 Stormwater Bypass Interceptor is an at-source treatment device that not only removes gross pollutants and fine silt from stormwater run-off, but effectively captures hydrocarbons and other light-liquid pollutants. Catering specifically for smaller catchment areas, the ALL-PUMPS SBI 720 enables specifiers and users alike to meet the requirements of council and environmental authorities. The SBI 720 is fitted with a heavy duty galvanised grate. To specify or to order, simply quote ALLPUMPS Stormwater By-pass Interceptor Model No. SBI 720, and nominate medium or heavy grate.
|
|
|
